Concept 203OAPAE 3.0 Mil Gloss White Opaque Vinyl Air Egress 60 Inches x 300 Feet

Concept® 203-OAPAE (Air Egress) is a 3-mil premium white gloss flexible calendered vinyl film coated with 200-5031 permanent gray acrylic pressure sensitive adhesive laminated to a 90# Air Egress Layflat liner. This film is designed to accept a variety of solvent-based, UV curable and latex inks common to wide format digital printing systems. Adhesive 200-5031offers good opacity with low initial tack building to a permanent bond within 24 hours providing repositionability to the graphic during application. The 90# Air Egress Layflat liner offers excellent product layflat in a variety of ambient conditions along with ease of application for large format graphics.

Applications:   
Concept® 203-OAPAE is designed for large format interior or exterior signage, decals, nameplates, and point-of-purchase displays.

Film Thickness:   
3.0 mils.
(Thickness variance +/- 10%)
 
Adhesive Thickness Side One:   
.8 to 1.0 mils.
(Thickness variance +/- 10%)

Liner Thickness Side One:  
 7.5 mils.
(Thickness variance +/- 10%)
 
Temperature Ranges:   
Minimum application temperature +40° F.
Service temperature -40° F to +180° F.

Dimensional Stability:   
Good.

Expected Exterior Exposure:   
Exterior:
Up to 3 years under normal exposure conditions.
Interior:
Up to 5 years under normal exposure conditions.

Adhesion:   

• To stainless steel 40 oz/in.
• PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
• Typical values. Individual values may vary.
• Test thoroughly for your specific application.

Water Resistance:   
Good. Test if immersed

Humidity Resistance:  
 Good.

Solvent Resistance:   
Good.

Storage Stability:   
6-month shelf life when stored at 70°F and 50% relative humidity.

Product Codes:   
203OAPAE-54 (54” x 150’ roll)

Recommendations:   
Completely evaporate ink solvents before application. Failure to do so may facilitate solvent penetration resulting in premature vinyl degradation.