Concept 101 3 Mil Lustre Clear PVC Laminate 61 Inches x 150 Feet

Concept® 101
LUSTRE OVERLAMINATING FILM - Permanent Adhesive

Summary:  a 3.0 mil lustre clear pressure sensitive PVC laminate with a permanent acrylic adhesive on a smooth 53# liner. This calendered PVC laminate also protects graphics from abrasion and moisture. GF 101 is best applied by the cold laminating process without the addition of heat and is designed to protect digital and screen printed images for exhibit and display graphics. GF 101 can be used in most instances where an overlay with a  lustre finish is required on interior or exterior applications.

Applications:    Lustre overlaminating film is designed to protect digital image prints and screen printed images for exhibit and display graphics. Can be used in most instances where an overlay with a semi-gloss finish is required.

Film 3.0 mils.
 Adhesive .8 to 1.0 mil.
 Liner 4.0 mils.
 (Thickness variance +/- 10%)
Dimensional Stability Good.
Temperature Ranges Minimum application temperature +40°F
 Service temperature range -40°F to +180°F.
Expected Exterior Exposure This product is designed for interior applications.
Exterior resistance has not been determined.
Adhesion To stainless steel 48 oz/in.
Tested according to PSTC-101 Method A procedures.
24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary. Test thoroughly before production.

Light Transmission Approximately 87%
Gloss
60° Gardner-MD Initial 30-50
Storage Stability 1-year shelf life when stored at 70°F and 50% relative humidity.

Product Series 101-31 (31” x 150’ roll)
101-39 (38” x 150’ roll)
101-52 (51” x 150’ roll)
101-55 (54” x 150’ roll)
101-61 (61” x 150’ roll)