1. Home
  2. Media
  3. Solvent, UV & Latex Media
  4. Wall, Floor & Window Graphics
  5. General Formulations Wall, Floor & Window Graphics
  6. General Formulations Concept 285 RoughMark 3.5Mil Matte White Opaque Vinyl - 54 Inches x 150 Feet
General Formulations Concept 285 RoughMark 3.5Mil Matte White Opaque Vinyl - 54 Inches x 150 Feet
General Formulations Concept 285 RoughMark 3.5Mil Matte White Opaque Vinyl - 54 Inches x 150 Feet

General Formulations Concept 285 RoughMark 3.5Mil Matte White Opaque Vinyl - 54 Inches x 150 Feet

Concept 285 3.5Mil Matte White Opaque Vinyl - 54 inch x 150 feet
Part #: 285-54
Shipping and Returns: Shipping and Return Policies
You need to be a registered customer to order this product.
Please Login to Your Account Or Click Here to Register.
Concept® 285 RoughMark
POLYEMERIC VINYL - HIGH-TACK REMOVABLE


Summary: Concept® 285 RoughMark is a 3.5 mil matte opaque polymeric vinyl film coated with a high-tack removable (HTR) acrylic pressure sensitive adhesive on a 90# layflat liner. The 90# liner provides excellent dimensional stability for digital printing. Concept® 285 accepts a variety of solvent-based, eco-solvent, latex and UV curable inks common to wide format digital printing systems.

Applications:    Concept® 285 RoughMark can be used in applications where a conformable removable vinyl is desired. This film conforms well with controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use Concept® 242 gloss clear cast laminate.
NOTE: If applied to a painted surface the paint must bond tightly to the substrate. Test all applications prior to use. Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces

Film Thickness:    3.5 mils.
(Thickness variation +/- 10%)

Adhesive Thickness Side One:    1.8 to 2.1 mils
(Thickness variation +/- 10%)

Liner Thickness Side One:    6.5 mils.
(Thickness variation +/- 10%)

Temperature Ranges:   
Minimum application temperature           +40°F.
Service temperature                              -40°F to +200 F.

Adhesion:    Stainless steel                                       16 Oz/ inch minimum
PSTC-101 Method A
Dwell is 24 hours at room temperature.

Removability:    Removable up to 6 months for common substrates under normal exposure conditions.

Water Resistance:    Excellent.

Humidity Resistance:    Excellent.

Storage Stability:    One year shelf life stored at 70° F and 50% relative humidity.

Product Codes:   
285-54
285-5475
285-60
285-6075

Recommendations:    Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.

Related Products

Recently Viewed Items

TOP