General Formulations Concept 252 WallTux Wall Fabric - 54 Inches x 100 Feet

Concept® 252 Wall-Tux Wall Fabric
Wall-Tux - Pressure Sensitive Fabric - Removable Adhesive

Summary: Concept® 252 is a 6.0 mil matte white polyester fabric with an acrylic removable pressure sensitive adhesive backed by a 70# Layflat release liner. Concept® 252 is formulated and manufactured to be chlorine and phthalate free*. The combination of fabric and adhesive allows removability of this product from normal wall surfaces. The 70# release liner provides excellent stability for processing using standard solvent, eco-solvent, UV curable and latex digital inks common to wide format digital printing systems.

Applications:    Concept® 252 is designed for temporary application of decals and graphics to most types of painted interior smooth walls. This includes most flat, semi gloss and gloss paint finishes. Decals may also be applied to sealed wall coverings. The surface must be smooth and clean prior to application. Consult with paint manufacturer for correct paint cure time before applying Concept® 252 to freshly painted surfaces.  Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces.

Film Thickness:    6.0 mils.
(Thickness variation +/- 10%)

Adhesive Thickness Side One:    1.3 mils.
(Thickness variation +/- 10%)

Liner Thickness Side One:    5.3 mils.
(Thickness variation +/- 10%)

Temperature Ranges:   
Minimum application temperature +40°F.
Service temperature -40°F to +200 F.

Dimensional Stability:    Good.

Adhesion:    To standard test panels 16 oz. /in. Tested according to PSTC-101 Method A procedures with 24 hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Bond to wall surfaces may vary. Test thoroughly before production.

Removability:    Removable up to 6 months under normal interior exposure conditions and applications. Removal of wall fabric should be done at a 180° angle while pulling slowly against itself.

Storage Stability:    6 months shelf life when stored at 70°F and 50% relative humidity.

Product Codes:   
Concept® 252-54 (54 x 100 )
Concept® 252-60 (60 x 100 )

Recommendations:    Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in product failure. Chlorine and phthalates are not intentionally added to the formulation of Concept® 252. There is a possibility of trace contamination during raw material manufacturing.