Concept 247 3.0 Mil Gloss Clear UV Polymeric Vinyl 54 Inches x 150 Feet

Concept® 247 is a premium 2.4 mil polymeric gloss clear vinyl film coated with a permanent clear acrylic pressure sensitive adhesive laminated to a 90# Layflat liner. This film accepts a variety of solvent-based, UV curable and latex inks common to wide format digital printing systems. Use in applications where a high quality clear vinyl film requiring flexibility, durability and resistance to sunlight is specified.

Applications:   
This product is recommended for indoor and outdoor uses where flexibility, durability and resistance to sunlight are required. These films can be used for fleet and vehicle graphics, architectural signage, commercial-retail signage, point-of-purchase graphics, and decals. Concept® 247 can also be printed with high quality screen printing inks formulated for flexible vinyl. May also be printed by thermal imaging. Consult your ink or ribbon supplier before printing and test all ink prior to production.

Film Thickness:  
 2.4 mil
(Thickness variance +/- 10%)

Adhesive Thickness Side One:  
 .8 to 1.2 mils
(Thickness variance +/- 10%)

Liner Thickness Side One:   
6.5 mils
(Thickness variance +/- 10%)

Temperature Ranges:   
Minimum application temperature is +40°F.
Service temperature is -40°F to +200°F.

Dimensional Stability:  
 Good.

Expected Exterior Exposure:   
Up to 7 years. Performance can vary depending on UV exposure.

Adhesion:   

• Minimum 40 oz/in.
• PSTC 101 Method A to stainless steel test panels.
• Dwell is 24 hours at room temperature.  

Water Resistance:   
Excellent.

Humidity Resistance:  
 Excellent.

Solvent Resistance:   
Good to most petroleum oils, greases, and aliphatic solvents such as heptane, kerosene and jet fuel.

Storage Stability:  
 One year shelf life stored at 70° F and 50% relative humidity.

Product Codes:   
247-54 (54”x150’)
247-60 (60”x150’)

Recommendations:   
Completely evaporate ink solvents before application. Failure to do so may facilitate solvent penetration resulting in premature vinyl degradation. Good to most petroleum oils, greases, and aliphatic solvents such as heptane, kerosene and jet fuel.