General Formulations Concept 238 MotoMark Gloss Clear "12 Mil Armor" Laminate 54 Inches x 75 Feet

General Formulations Concept 238 MotoMark Gloss Clear "12 Mil Armor" Laminate 54 Inches x 75 Feet

Concept 238 Gloss Clear "12 Mil Armor" Laminate 54 inch x 75 feet

238-54
General Formulations
You need to be a registered customer to order this product.
Please Login to Your Account Or Click Here to Register.
Concept® 238 MotoMark "ARMOR" UV Laminate
MotoMark - "ARMOR" Clear UV Overlaminate


Summary: Concept® 238 MotoMark 12.0 mil Armor is a flexible Gloss Clear calendared vinyl offering, UV protection. This film is designed for use as a protective overlaminating film on the 235® MotoMark . Recommended for the powersport, graphic and decal markets. This product is formulated for exceptional clarity and durability.
Applications:    Concept® 238 MotoMark is intended for use as the overlaminating film on Concept® 235 MotoMark 4.0 mil Grip . This overlaminate and vinyl combination is used for a variety of Quads, Snowmobiles, Motocross, Powersport Vehicles, Helmets and Carts. The adhesive system is formulated to adhere to most common solvent, eco-solvent, latex, thermal, UV, offset and screen inks. However, specific formulations must be tested before use. Some ink may contain excessive flow additives that could reduce adhesion of this product. Testing is always suggested before production. Specifically test applications to gas tanks.
Film Thickness:    12.0 mils.
(Thickness variation +/- 10%)
Adhesive Thickness Side One:    1.8 to 2.2 mils.
(Thickness variation +/- 10%)
Liner Thickness Side One:    4 mils.
(Thickness variation +/- 10%)
Temperature Ranges:    Minimum application temperature +40°F.
Service temperature -40°F to +200°F.
Expected Exterior Exposure:    5 Years under normal exposure conditions and proper care.
Adhesion:    To stainless steel 40 oz/in. Tested according to PSTC-101 Method A with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance:    Excellent.
Humidity Resistance:    Excellent.
Storage Stability:    One year shelf life when stored at 70°F and 50% relative humidity.
Product Codes:   
238-15 (15 x 75 )
238-24 (24 x 75 )
238-30 (30 x 75 )
238-54 (54 x 75 )
238-60 (60 x 75 )

Recommendations:    Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. Always thoroughly test this product to confirm that it meets your requirements. Proper preparation of plastic surfaces requires cleaning with alcohol or acetone to remove contaminates before application. Failure to prepare the surface can cause premature failure of the graphic or decal.

The above recommendations for these products usage does not suggest or constitute a verbal or written guarantee or warranty by the manufacture or its dealers of this product. Individual purchasers or users shall be responsible for determining the materials suitability as well as its intended use and application.
There are no reviews for this product!

Related Items

Recently Viewed Items

Customer Service available Mon - Fri 8am - 5pm CST

Contact us: cs@amcadgraphics.com or Give us a call: 972-245-7883

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.