Concept® 203-OAPAE (Air Egress)
is a 3-mil premium white gloss flexible calendered vinyl film coated with 200-5031 permanent gray acrylic pressure sensitive adhesive laminated to a 90# Air Egress Layflat liner. This film is designed to accept a variety of solvent-based, UV curable and latex inks common to wide format digital printing systems. Adhesive 200-5031offers good opacity with low initial tack building to a permanent bond within 24 hours providing repositionability to the graphic during application. The 90# Air Egress Layflat liner offers excellent product layflat in a variety of ambient conditions along with ease of application for large format graphics.Applications:
Concept® 203-OAPAE is designed for large format interior or exterior signage, decals, nameplates, and point-of-purchase displays.Film Thickness:
(Thickness variance +/- 10%) Adhesive Thickness Side One:
.8 to 1.0 mils.
(Thickness variance +/- 10%)Liner Thickness Side One:
(Thickness variance +/- 10%) Temperature Ranges:
Minimum application temperature +40° F.
Service temperature -40° F to +180° F.Dimensional Stability:
Expected Exterior Exposure: Exterior:
Up to 3 years under normal exposure conditions.Interior:
Up to 5 years under normal exposure conditions.Adhesion:
- To stainless steel 40 oz/in.
- PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
- Typical values. Individual values may vary.
- Test thoroughly for your specific application.
Good. Test if immersedHumidity Resistance:
6-month shelf life when stored at 70°F and 50% relative humidity.Product Codes:
203OAPAE-54 (54” x 150’ roll)Recommendations:
Completely evaporate ink solvents before application. Failure to do so may facilitate solvent penetration resulting in premature vinyl degradation.